Prefab Metal Aircraft Hangars

Common Uses for Aircraft Hangars

Prefab metal buildings are the preferred construction method for aircraft hangar applications because they offer a clear-span interior, faster construction, and lower cost than traditional stick-built or masonry construction. Local dealers can engineer buildings to meet your specific state and county load codes.

• Private aircraft storage
• Corporate jet hangars
• FBO & airport facilities
• Agricultural aviation hangars
• Helicopter storage
• Maintenance & repair hangar

Typical Size & Cost Ranges

Size requirements for aircraft hangars vary widely depending on your intended use, local zoning allowances, and future expansion plans. The table below provides general guidance:

Size	Typical Application	Estimated Cost*
Under 40×60	Small personal or hobby use	$15,000 – $50,000
40×60 to 60×100	Standard agricultural or commercial	$35,000 – $120,000
60×100 to 80×150	Mid-size commercial or industrial	$80,000 – $250,000
80×150 to 100×200	Large commercial or warehouse	$150,000 – $450,000
Over 100×200	Large industrial or distribution	$400,000+

* Estimated installed costs including foundation, framing, roofing, and one set of doors. Prices vary by region, insulation spec, door count, and local labor rates. Request free quotes for accurate local pricing.

What's Included in a Prefab Metal Building Kit?

Most pre-engineered metal building packages include:

• Primary steel framing — rigid frames, columns, and rafters engineered to your local wind, snow, and seismic codes
• Secondary framing — purlins, girts, and eave struts
• Roof and wall panels — galvanized or Galvalume steel panels, typically 26-gauge or 29-gauge
• Trim & flashing — factory-cut to match your panel color
• Fasteners & sealants — appropriate for your climate and exposure
• Engineer-stamped drawings — required for most building permits

Items typically not included in a kit (quoted separately): foundation/concrete, insulation, electrical, plumbing, HVAC, interior finishes, and erection labor.

Choosing a Aircraft Hangar Metal Building Dealer

When comparing quotes for aircraft hangars, look for these factors:

• Local experience: Dealers familiar with your state's building codes and permit process will save you time and money.
• Engineer-stamped drawings: Required in most jurisdictions — confirm your dealer provides them with the kit.
• Gauge and coating quality: Compare primary framing gauge, panel gauge, and coating type (Galvalume, painted, etc.).
• Erection services: Some dealers provide turnkey installation; others supply materials only. Know what you're comparing.
• Warranty: Look for 25–40-year panel warranties and structural frame warranties.
• Lead time: Current lead times typically range from 6–14 weeks; confirm before committing.

Frequently Asked Questions